flensa c70600

Dua puluh tahun pengalaman produsen flensa c70600, menyediakan layanan dan produk profesional untuk Anda!

fitur flensa c70600

We have been producing c70600 in our factory for 20 years.C70600 flange，Also known as CuNi90/10 flange. types are WN, SW, BL, and LAP. The following are the six commonly used ways, and you can also send us the c70600 flange drawings to make according to your drawings.

It must be emphasized that to ensure quality, our C70600 flanges are all produced by forging copper-nickel rods.We never produce C70600 flanges using casting methods.

Flensa C70600 WN-FF

Flensa c70600, las pantat leher tinggi, 2 inci, 20 bar, standar eemua234

Flensa c70600 BL / FF

c70600 blind flange, standar ASME B16.5-2000, 150lbs, untuk pelanggan teknik minyak lepas pantai.

Flensa c70600 SW-FF

Flensa C70600, 1/2 inci, soket dilas, terstandardisasi untuk EEMUA234.

C70600 Composite weld neck flange-inner flange

C70600 inner flange is designed for use with galvanized steel flanges.

C70600 solid slip on flange

C70600 slip on flange, commonly conforming to DIN 86033 standard, using butt welding method.

ASTM B466 C70600 Stub End

The C70600 stub end is also designed for use with galvanized outer flanges. The stub end functions similarly to an inner flange when paired with galvanized steel flanges, with the inner flange height being approximately twice that of the stub end.

Pabrik kami disertifikasi oleh Lembaga Klasifikasi

c70600 flange manufacturing

C70600 flange QC Inspection

c70600 flange requirement

Hal-hal yang perlu kami konfirmasikan dengan Anda sebelum pembuatan flensa c70600. Pastikan flensa c70600 yang Anda terima akurat.

garis air

permukaan penyegelan flensa c70600, standarnya tidak ada garis air. Untuk memperbaiki paking penyegelan dengan cepat saat menggunakan, beberapa pelanggan memerlukan garis air permukaan penyegelan flensa dibuat menjadi dua alur atau benang padat. Kami dapat membuat garis air sesuai permintaan Anda.

Standar atau gambar

Anda harus memberikan standar dan tekanan apa yang sesuai dengan flensa c70600, karena ada banyak standar untuk flensa c70600. Jika Anda tidak tahu standar apa, Anda dapat mengirimkan tangkapan layar gambar kepada kami. Teknisi teknis kami yang berpengalaman menggambar gambar untuk Anda konfirmasi.

perpipaan

Anda harus memberi tahu kami ukuran pipa yang akan dilas dengan flensa c70600, dan kami membuat leher flensa agar sesuai dengan ketebalan dinding pipa. Ini memudahkan Anda untuk mengelas dan hasil lasan terlihat lebih baik.

our c70600 flange project

Kapal tunda klien membutuhkan flensa c70600, dan kami berpengalaman dalam pengelasan dan melakukan seluruh pengelasan dan pengujian pipa tembaga-nikel.

Pipa air laut peralatan pemadam kebakaran menggunakan flensa c70600, yang juga harus kami las dengan baik.

PERTANYAAN YANG SERING DIAJUKAN

What is C70600 flange?

c70600 flange is also called CuNi90/10 flange, or CuNi10Fe1.6Mn flange.

What are the common standards for C70600 flanges?

We have been manufacturing and supplying flanges to our customers for 20 years. Based on our experience, the standard numbers for C70600 flanges include:
DIN 86037, DIN 86033
EEMUA 234
EN 1092-1
ANSI B16.5
We can also custom-produce flanges according to drawings you provide.

Are the C70600 flanges you supply forged or cast?

We supply C70600 flanges to shipyards and offshore engineering projects worldwide. Since our company’s inception, we have exclusively provided forged flanges to our customers. Cast C70600 flanges may develop internal defects that lead to leakage during use. Rest assured, our C70600 flanges are forged, eliminating inherent material flaws through the forging process.

What is the pressure rating for the C70600 flange?

According to standards, German standards specify pressure ratings of 10 bar and 14 bar. European standards use pressure ratings of 16 bar and 20 bar, while American standards employ 150 lbs and 300 lbs. The higher the pressure rating, the greater the thickness of the C70600 flange.

What dimensions C70600 flange you supply?

We can manufacture flanges ranging in size from 15mm to 910mm. The largest size we have produced for a customer is 711mm.

What is the delivery time for C70600 flanges?

Due to the numerous standards and dimensions for C70600 flanges, we are unable to maintain stock. For standard C70600 flanges, production takes 15 to 35 days based on specifications, with delivery times dependent on your quantity and requirements. For non-standard C70600 flanges, we require drawings and confirmation through communication with you. This confirmation process takes 3 to 7 days, potentially longer. Therefore, the delivery timeframe for non-standard flanges is 30 to 45 days.

Can you provide matching pipes and fittings?

Yes, we can supply you with matching C70600 pipes, elbows, tees, reducers, and other fittings.